{
  "source": "завіса 35.b3d",
  "format": "BAZIS BZ85",
  "payload_bytes": 761621,
  "dictionary_entries": 191,
  "current_unique_panels": 4,
  "panel_names": ["Двері", "Двері", "Двері", "Двері"],
  "top_hinge_groups_detected": 4,
  "hinge_system": "GTV hydraulic inset Clip-On H=0, ZM-ECHC07BEO",
  "nested_fastener_elements_after_id_dedup": {
    "total_type_3001": 144,
    "hinge_body": 16,
    "hinge_cup": 16,
    "cup_marker_35x12": 16,
    "mounting_plate": 16,
    "screw_4x16": 32,
    "pilot_3x3": 32,
    "arm_cover": 16
  },
  "decoded_hole_definitions": {
    "hinge_cup": {
      "diameter_mm": 35,
      "depth_mm": 12,
      "local_direction": [0, 0, -1],
      "local_position": [0, 0, 0],
      "drill_mode": 2
    },
    "pilot_hole": {
      "diameter_mm": 3,
      "depth_mm": 3,
      "local_direction": [0, 0, -1],
      "local_position": [0, 0, 0],
      "drill_mode": 2
    }
  },
  "architecture_implications": [
    "Hardware must support nested assemblies, not only a single mesh/object.",
    "A hinge cup is a real drilling feature with diameter and depth, not a decorative circle.",
    "One hinge assembly contains visual parts plus separate drilling/fastener elements.",
    "CENTAURUM should preserve hardware definition -> nested elements -> hole definitions -> transformed instances."
  ],
  "confidence": {
    "cup_35x12": "high",
    "pilot_3x3": "high",
    "nested_instance_counts": "high after BAZIS ID de-duplication",
    "panel_to_hole ownership": "not yet fully decoded from B3D hierarchy"
  }
}